QB Winery Solutions

Office Hours 1-28-20

by

Here is the recording for Office Hours today. You can find the following wine accounting & QuickBooks topics in this month’s recording:

  1. Units of Measure, getting started (1 minute mark) **I solved George’s problem and added a comment to the Units of Measure procedure
  2. Details on a new course – The Costing Book Checklist (5 minute mark)
  3. AMS and Vintrace to QB  – Converting from those programs to QB (7 minute mark)
  4. What POS programs do you recommend? Vinespring (11 minute mark)
  5. We’re donating all bottle proceeds to a special cause – How do I record it? (12 minute mark)
  6. 1099 review of new CA law (13 minute mark)
  7. Should I use Vinespring as a POS or Square? – It depends on the size of your winery (15 minute mark)
  8. VinoShipper – A discussion of workflows in VinoShipper (20 minute mark)
  9. Data dump for the Push-in Method – What does a transaction report look like? (24 minute mark)
  10. Bottle runs – How do I track 1st off and last off? (26 minute mark)
  11. Let’s chat about Kegging Wine (28 minute mark)

Silver Club members, please log in to view the recording

Office Hours 10-29-19

by

Here is the recording for Office Hours today. You can find the following wine accounting & QuickBooks topics in this month’s recording:

  1. Part 1: I watched the Grapes, Grapes Grapes course, but I am a VERY Small winery – Do I have to use the clearing account to record my grapes? – at the .51 min. mark
  2. Part 2: Why should I use Purchase Orders during harvest? – at the 3.11 min mark
  3. How do I find if the cost inventory is set up in the file? (We show how to find the report and how to use it) at the 22.18 mark
  4. What are the 5 Fundamentals of a winery QuickBooks File – at the 36.53 min mark
  5. Is there a more simple way to do the costing book? – at the 43.38 minute mark

Silver Club members, please log in to view the recording

How to Record Shiners You PURCHASED

by Leave a Comment

A winery owner asked me this question recently:

Jeanette –
I have a question of the proper way to make a new entry. We purchased 220 cases of Sparkling wine from Rack & Riddle to sell under our brand.
So, the initial entry into the system is for finished case goods 240 cases @ $108….given it’s not coming out of bulk…what is the proper entry?
Thanks – Mark

The way that shiners are entered is fairly straightforward, however it depends on the situation (doesn’t it always…)

Scenario #1 – The shiners were labeled and finished by the vendor – this is super simple
Scenario #2 – You bought shiners, labels, and foils from different vendors and hired a crew or bottling line to apply the lables – this has a few more steps

For scenario #1

  1. Create the item as usual
  2. Create a bill using the item tab to record the number of units and total cost. Remember to use the same units for this SKU as for all the others, so if you use “bottles” you will need to convert the number of cases to bottles. Also, ignore the cost that you were quoted. Enter the total cost of the actual bill. QuickBooks will calculate what your actual cost per bottle was.

That’s it…just 2 steps. Of course, you will need to pay the bill at some point.

For scenario #2

  1. Create current asset account called “Shiners” (or something like that)
  2. Create a sub-account for the specific SKU (I am assuming you might do this again in the future)
  3. As the bills (or checks and credit card charges) for the different components show up, record all of these to the SKU sub-account.
  4. If these were bottled during a regular bottle run so the labeling labor shows up on the bottler’s bill, calculate the portion of the cost for the shiner SKU and record that amount to the SKU Sub-account.
  5. After the labels have been applied and you are ready to bring them into inventory, create a Journal Entry check and enter the information on the item tab as usual. For the total cost of the wine, look at the total amount of the SKU sub-account.
  6. On the expenses tab, use the sub-account name and enter the amount as a negative number.
  7. When you save the journal entry check, the total for the sub account should be zero.

The tricky part of this procedure is that you will be recording the components with a different workflow than usual. This may be confusing, but trust me…it is much simpler than including these bottles on the Bottling worksheet in the costing book.

Cheers!

Office Hours 07-30-19

by

Here is the recording for Office Hours. The topics that came up were:

  1. After 10 years of business, how do you fix your QB file? at the 1:01 min. mark
  2. Converting QB Desktop to QB Online; things to consider – at the 18.40 min. mark.
  3. File Hosting in QB (alternatives to QB online) – at the 22:30 min. mark.
  4. Bottle Runs – recording case goods into inventory (hint: not when you sell them) – at the 32:00 min. mark
  5. How to record and track the purchase of grapes – at the 36:33 min. mark.
  6. How to record custom crush contract expense – at the 45:07 min. mark.

Silver Club members, please log in to view the recording

Costing Book Activities

by

I updated the Costing Course (How to Calculate the True Cost of Your Wine) and I added several activities so you can practice some of the techniques I discuss.

I also added a new module with a 4th costing book example. This module explains the different choices you can make when laying out the costing book. Depending on your winemaking processes and your business needs, you may choose to have a few or a lot of bulk lots. If you have just a few bulk lots in your costing book, it will be easier to maintain the costing book.

Module 7 – Steffie Farm and Vineyard

Activity – Chart of Accounts

Activity – Allocation Math

Activity – Costing Book

Activity – Bulk Lots

Have fun!

An Easy Way to File CA Sales Tax (without Ship Compliant)

by

If you have more than $500,000 in revenue in California (excluding distribution and wholesale sales), you are subject to the sales tax filing rules that were effective April 1, 2019. Many small wineries now meet this requirement and filing the California Sales Tax return is much more complicated than in the past. You can thank South Dakota vs Wayfair for this new complication. In the past, the district tax only applied to companies that had a “physical presence” in that district, but it now applies to any winery (or business) that exceeds $500,000 in retail sales in California.

This is not as simple as looking up the zip code because it might cross different districts. For example, the zip code for Healdsburg, 95448, includes addresses in the City of Healdsburg which are taxed at 8.75% whereas an address in Dry Creek Valley which is outside the city has the rate of 8.25%

The State of California has a nice webpage where you can plug in an address and it will lookup the sales tax rate. Click Here. But it is not realistic to lookup up every address.

You could signup for a service like ShipCompliant or Compli, which are programs designed for the wine industry, but these are expensive, and you may not justify the fee just to file your California Sales Tax Return.

Here is the outline for a process that will cost about $210 per year. I will record a complete video to show the steps, but in the meantime, these are the basic steps

  1. Sign up for a Basic plan at Taxjar.com. This is a sales tax program that will look up the sales tax rate. It is not an alcohol compliance program, so you will have to keep an eye out for those details with whatever procedure you are currently using.
  2. Find a report from your POS program that includes the shipping address and the taxable sales.
  3. Edit that report to fit the format required by Taxjar.
  4. Upload the report to Taxjar.
  5. Print the California report and use those details to enter the sales in the various districts.

This process is super fast. The most complicated part is formatting the report to match Taxjar’s required format, but once you do it the first time, it will be easier the next time.

Note: TaxJar could file the California return for you, but there is additional information that must be included, so you still have to file the return yourself using the CDTFA portal. But, having TaxJar summarize the sales for each district is a huge time saver.

If you already have ShipCompliant: You need to turn on the reporting module, and then turn on the California state form. Make sure your settings have been revised for the new rules.  As with TaxJar, you will use ShipCompliant to calculate the sales by district, but you will still need to manually enter the details into the CDTFA sales tax portal.

If you are interested in the full mini-course on how to file the California sales tax return, fill out the form below and we will notify you as soon as it is ready.

Office Hours 04-30-19

by

Here is the recording for Office Hours. The topics that came up were (follow the links for additional information):
  1. Inventory Tracking In QB – at the 10:04 min. mark
  2. Intuit Help is more for tech support then winery support – at the 10:11 min. mark
  3. Entering 3 Liter Bottles into inventory – costing sheet – at the 10:12 min. mark
  4. Wine for Donations/ Depletions – at the 10:14 min. mark
  5. Merchandise – grouping, baskets, assemblies Inventory – at the 10:22 min. mark
  6. Back to Inventory – at the 10:30 min. mark
  7. Bottling – at the 10:33 min. mark
  8. Bottling Game Plan – at the 10:52 min. mark
  9. Labor Cost – at the 10:54 min. mark
  10. Barrel Cost Allocation – at the 10:56 min. mark
    1. Downloads for the Calculate the True Cost of Wine Course
    2. Module 2 – Allocation Math
    3. Example Depreciation Spreadsheet
      1. Note a lesson on this will be out soon!

Silver Club members, please log in to view the recording

Reset Inventory Accounts in the New Year

by

There is no hard close to the QuickBooks file at the end of the year because that is how QuickBooks works. However, resetting the inventory accounts is a step that needs to be done at the beginning of the year.  This step does not affect any of the accounting, but it makes the sub-accounts of the bulk wine and case goods zero which makes it much easier to match the costing book to the balance sheet.

Remember that finishing the costing book and confirming that it matches the balance sheet is a necessary process, even though it is often frustrating. If you reset the inventory accounts it is much easier to match the cost pools and the transfers between the bulk wine and the case goods.

I find that it is fun to do this journal entry. I don’t know why maybe it’s because it means that a new year has started, or maybe it’s just a nerd accounting thing.

Cheers!

In this video (must be a Silver Club member to view) I will walk you through the steps. If you would like assistance, come to Office Hours or use this link to set up a coaching session.

Office Hours 02-26-19

by

Here is the recording for office hours. The topics that came up were:

  1. JE for Transferring Inventory for the new year
  2. How to Memorize a JE
  3. Separating out Packing & Shipping cost for retail
  4. Closing Processes for the year-end <include link to year-end checklist
  5. Resetting Inventory Accounts
  6. The cost to Aquire an asset
  7. Fixed Assets/ deprecations
  8. Shipping through another winery and how to account for the cost
  9. Sales tax
  10. Square
  11. Discounts
  12. Direct and Indirect Costs

Silver Club members, please log in to view the recording.

MY FAVORITES

Quick Access to the lessons and pages that you mark as “favorite”.

Blog/Quickies

CLICK HERE to view Quickies Blog items.